|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3135||Genuine Swiss Clone 3135 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Band Type||Rubber Band|
Clasp: Deployment. Deployment clasps are used in the watch allows the user to fold it into several positions or angles for unique use.
Dial Markers: luminous dot. These luminous spots in the watch will light up when you leave the light.
Band Material: 316L. The raw material of this watch is the hardest 316L steel, which is a very strong and corrosion-resistant steel. It has the same strength as the most popular grades (HRC52, HRC55), but only half the weight. Compared with competitors, the production cost of stainless steel is also higher.
Luminiscence: Hands and Markers. The design of the watch’s luminiscence is hands and markers. With this watch, you can know time anywhere and anytime.
Crystal: Sapphire Crystal. The sapphire crystal table mirror is very ornamental, and it can bring a brand new visual effect when looking at the time. Tips: The A Replica is applied with mineral glass instead of sapphire.
Watch Case: 316L. A good case can better protect your watch. 316L stainless steel is a medium-to-high-end case material. Because it contains molybdenum, it is more wear-resistant than 304, and the grade is also high.
Second Markers: Minute Markers around the outer rim. The second mark on the watch is a small round dial, placed on the outside of the watch to indicate the time.
Hand: Silver-tone. About the hand design of the watch is silver-tone, which is the same color as your case color. It fits the watch well.
Water Resistance: 30 meters. A good waterproof of the watch has been applied, it is 30 meters. But please make sure you close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.